基于机器视觉的干涉条纹检测

基于机器视觉系统OpenMV,以迈克耳孙干涉仪干涉条纹为研究识别对象,根据光源相干性及干涉条纹动态特性,提出基于灰度采样统计的干涉条纹识别检测算法(干涉条纹同心形态搜索算法),运用MicroPython或Python语言编制实时检测程序,运行结果表明仿真和真实干涉条纹都得到了可靠的检测,精度为0.5个条纹,并且测量不确定度主要由算法制定的此条纹检测精度引起,证明了干涉条纹机器视觉检测方法和技术的有效性.     

不同燃烧状态飞火颗粒自由燃烧规律研究

飞火是开放空间中大尺度火灾非连续性蔓延的主要形式。本文通过不同热流下的木质飞火颗粒自由燃烧实验,揭示不同燃烧状态飞火颗粒的结构变形、质量损失及温度分布的变化规律。研究表明,颗粒结构变形受材料化学反应机制和热机械力作用共同影响;颗粒燃烧反应易造成热解气体的内部积聚,以致内压激增、诱发喷射或喷溅细小颗粒的现象;阴燃过程颗粒表面温度变化较小但持续时间很长,明火状态的颗粒持续高温并且温度与质量变化剧烈。     

燃气-蒸汽联合循环余热回收系统性能研究

燃气发电是我国城市供电的主要形式之一,针对LNG接收站一体的电厂发电模式进行研究,提出一种新型燃气-蒸汽联合循环热电联供系统,利用超临界CO₂布雷顿循环结合有机朗肯循环(ORC)辅助发电,将LNG作为冷源,对烟气余热进行三级利用。通过构建热力学和经济模型,以Aspen Plus软件模拟值为基础,结果表明:在消耗燃料1.704 kg/s(LNG)的条件下,联合循环净发电功率可达45 MW,供热量41.5 MW,余热利用率,热效率和?效率分别为88.50%,52.79%和46.69%。结合热-经济学与参数分析,利用Matlab优化后的最小单位发电成本为0.1529 CNY/kWh。考虑到碳排放价格,供电、供热、供气收益,燃料价格和设备成本,电厂每年的理想收益可达2989.5万元。     

外型和内型C-2位单取代降冰片烯衍生物的核磁共振波谱研究

C-2位单取代降冰片烯衍生物中降冰片烯环存在各向异性,且多数为外型和内型异构体的混合物,导致其结构解析困难.针对这一问题,本文在制备了单一构型的C-2位羧基和羟甲基取代的降冰片烯衍生物的基础上,利用¹H NMR、DEPT135、¹H-¹H COSY、¹H-¹³C HMQC、¹H-¹H NOESY谱和相应的耦合裂分信息,对外型-5-降冰片烯-2-羧酸、内型-5-降冰片烯-2-羧酸、外型-5-降冰片烯-2-甲醇和内型-5-降冰片烯-2-甲醇的¹H和¹³C NMR信号进行归属,并探讨了降冰片烯衍生物的取代基种类及空间构型对¹H NMR化学位移的影响.     

含损伤黏弹性阻尼加筋层合板声功率和指向性变异*

该文旨在研究损伤位置和程度对自由阻尼加筋层合板声辐射功率和指向性的影响。基于Mindlin和Timoshenko梁理论,建立了自由阻尼层合板-梁组合结构有限元模型。数值求解四边简支边界条件自由阻尼加筋层合板振动响应,继而通过Rayleigh积分计算加筋层合板辐射声功率和指向性。将计算得到的前4阶模态固有频率、声辐射功率与指向性与已有文献进行了对比基本一致,验证了数值模型的正确性。最后,详细讨论了损伤位置和程度对自由阻尼加筋层合板固有频率、振型、声辐射功率和指向性的影响,结果表明：随着结构损伤程度的增大,声辐射功率峰值向低频移动,在更多角度上出现明显的指向性;声辐射功率和指向性对损伤位置比损伤程度更加敏感。     

Composition assessment of ferric oxide by accurate peak fitting of the Fe 2p photoemission spectrum

A quantitative study of the surface composition of ferric oxide employing photoemission spectra is presented. It was possible to accurately reproduce the expected composition (Fe_2.00±0.05O₃) by modeling the background as a combination of Shirley‐type (Shirley–Vegh–Salvi–Castle) and slope backgrounds through the active approach. The line‐shape employed to fit apparent peak asymmetries was the double‐Lorentzian. It was possible to resolve a previously unreported satellite located at ~729 eV. Copyright © 2016 John Wiley & Sons, Ltd.     

Understanding the effect of filler shape induced immobilized rubber on the interfacial and mechanical strength of rubber composites

Styrene butadiene rubber (SBR) composites with silica, halloysite nanotubes (HNTs) and montmorillonite (MMT) were prepared and the interfacial and mechanical properties were compared to understand the reinforcing behaviours of these fillers based on the results of SEM, DSC, DMA, etc. Due to the formation of interparticle domain, HNTs immobilized more rubber approaching their surface than silica and MMT. Interestingly, only tightly immobilized rubber chains made contribution to the enhancement of interfacial and mechanical strength of SBR composites. This was because the tightly immobilized rubber acted as a bridge in the filler-rubber interface and induced the formation of stretched rubber chains linked filler network when the composites were loaded in tension, while loosely immobilized rubber were easy to slip off from filler surface, causing the separation between filler and bulk rubber. Therefore, silica with more tightly immobilized rubber approaching its surface showed better reinforcing effect on rubber than HNTs and MMT.     

pyMolDyn: Identification,structure, and properties of cavities/vacancies in condensed matter and molecules

pyMolDyn is an interactive viewer of atomic systems defined in a unit cell and is particularly useful for crystalline and amorphous materials. It identifies and visualizes cavities (vacancies, voids) in simulation cells corresponding to all seven 3D Bravais lattices, makes no assumptions about cavity shapes, allows for atoms of different size, and locates the cavity centers (the centers of the largest spheres not including an atom center). We define three types of cavity and develop a method based on the split and merge algorithm to calculate all three. The visualization of the cavities uses the marching cubes algorithm. The program allows one to calculate and export pair distribution functions (between atoms and/or cavities), as well as bonding and dihedral angles, cavity volumes and surface areas, and measures of cavity shapes, including asphericity, acylindricity, and relative shape anisotropy. The open source Python program is based on GR framework and GR3 routines and can be used to generate high resolution graphics and videos. © 2016 Wiley Periodicals, Inc.     

Crosslinking network structure governing particle shape and size distribution by one-step emulsion polymerization in the presence of particle coagulation

In this study, sub-200?nm, crosslinked latex particles with a narrow particle size distribution were prepared by one-step emulsion polymerization in the presence of particle coagulation. The relationship between the particle shape and particle coagulation was investigated by varying the time of crosslinking network structure formation and particle coagulation. Particles with irregular shapes such as doublet, triplet, and ellipsoid were obtained using divinylbenzene (DVB) and ethylene glycol dimethacrylate (EGDMA) as the crosslinking agents, because the crosslinking network structure of particles was formed before the particle coagulation. In contrast, latex particles with a uniform spherical shape were also prepared using triallyl isocyanurate (TAIC) or dihydrodicyclopentadienyl acrylate (DCPA) as the crosslinking agents by delaying the time of crosslinking network structure formation. Alternatively, uniform spherical latex particles were prepared by bringing forward the particle coagulation time using cationic initiator, 2, 2′-azobis (2-methylpropionamidine) dihydrochloride (AAPH). This study presents a new idea that would further broaden the application of particle coagulation in emulsion polymerization.     

聚甲氧基二甲醚的合成及其物理化学性质表征

聚甲氧基二甲醚（H₃CO（CH₂O）_nCH₃, PODE_n或DMM_n, n ≥ 2）具有独特的物理化学性质;作为一种柴油添加剂,可以有效提高油品燃烧效率并达到节能减排的目的。首先合成了一系列聚合度n为2、3、4和5单一组分的聚甲氧基二甲醚,采用NMR、FT-IR、Raman和DFT计算等手段对每个聚甲氧基二甲醚单体的化学结构进行表征,并对其在298.15-323.15K温度的密度和黏度进行了测试。结果表明,聚甲氧基二甲醚的密度和黏度随着温度的升高而逐渐降低,随着聚合度的增加而逐渐升高。同时,聚甲氧基二甲醚PODE_n（n =2-5）的闪点和倾点以及溶解热和凝固热均随着聚合度的增加而提高。